Comparing the Titanium Grades 2, 5, 7 and 12

Q: I’m working on a project that is using Titanium bolts for our equipment and we are considering a few different sizes and grade bolts; we are considering Gr.2, Gr.5, Gr.7 and Gr.12. What would you typically specify as the maximum tensile allowable (i.e. 2/3*yield) and the maximum shear allowable (i.e. 0.4*yield)? If so, could you please provide information on the yield strength and allowables for the various grade bolts at 100°C and 235°C?

A: First off regarding the grades, the biggest determination in the grade of Titanium you need is the corrosive environment and the strength.

  • From a corrosion point of view, Titanium grade 2 and 5 screws would be on the lower end of the corrosion resistance, improving with Grade 12 and Grade 7 being the best as it has an addition of palladium.
  • From a strength point of view Titanium grade 5 bolts would be the strongest followed by Grade 12 and weakest being TI2 / TI7.
  • From a cost point of view, Titanium grade 2 bolts are the most economical followed by Gr5, 12 and 7. I don’t know the exact ratios of the materials but TI5 is generally 30% more expensive than Gr2. Grade 7 will be at least 2x Grade 2. Not sure about 12 as its not that common for fasteners.
  • Regarding the mechanical properties, I have attached a chart from the ASTM B348 spec (Ignore the yellow highlight). This will give you the room temperature properties. Also for the strength at temperature I have attached a brochure that will show the strength vs temperature of each allow (starting on page 16). From these charts you could calculate the maximum mechanical properties at temperature.
    Hope this helps.

image.png

This entry was posted in Application, Corrosion Resistance, FAQs, High Strength, Material, Specialty Metal Fasteners and tagged , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert