Understanding Different Flat Washers: General Purpose, SAE, USS & Oversize

Q: What is the difference between a general purpose, SAE, USS and oversized washer? Are they all flat washers or different styles. And is one better than the other?

A: General purchase, SAE, USS and oversize are all flat washers and all serve the same purpose of distributing the load across a larger surface area than the bolt head itself. The differences in the washer names just refer to different dimensions of that particular sized washer. So for example for a 1/2″ washer the dimensions are all different depending on the style of flat washer you need.
General Purpose 1/2″ Washer: ID=0.531″ OD=1.25″ THK=0.055″-0.069″
SAE 1/2″ Washer: ID=0.531″ OD=1.062″ THK=0.074″-0.121″
USS 1/2″ Washer: ID=0.562″ OD=1.375″ THK=0.086″-0.132″
Oversized 1/2″ Washer ID= 0.531″ OD=1.25″ THK=0.110″-0.114″

Typically SAE washers have a larger ID (inter diameter) and smaller OD (outer diameter) than the other washers and are often used for expensive, more exotic alloys. Oversized washers have either larger diameters and/or thickness than a general purpose washer. Larger diameter oversized washers are often used for covering bigger holes and are great at distributing the force. Flat washer can also be used as spacers/levelers when their thickness is greater. One style is not better than the other, it just depends on the dimensions that your application requires.

This entry was posted in Advanced Ceramic Fasteners, Application, Engineered Polymer Fasteners, FAQs, Material, Specialty Metal Fasteners and tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert