An extremely strong precipitation hardened stainless steelhex cap screw s

17-4 PH hex head cap screws are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 stainless steel, 17-4 PH hex head cap screws yield strength is up over 4 times greater. When compared to Duplex 2205 screws, the yield strength of 17-4 PH can be up to 2- 1/2 times greater.

17-4 hex head cap screws are available in 8 different aged (precipitation hardened) conditions offering a variety of mechanical properties (see below). 

Resources: 17-4PH Torque Specs

17-4 PH Screw Types: 12 Point ScrewsButton Head Cap ScrewsFlat Head ScrewsHex Cap ScrewsPan Head ScrewsSet ScrewsSocket Head Cap ScrewsTamper Resistant Security Screws, Torx Screws, Vented Screws


17-4 PH Hex Head Cap Screw Features and Benefits

It is important to differentiate between a 17-4 PH hex head cap screw and hex head bolt. Often people assume they are the same, but they are actually very different fasteners in terms of how they are manufactured, as well as from an application perspective. Regardless of your choice, 17-4 PH hex heads offer strong, stable joints because of their large head service.

The Hex Comparison

Hex Head Cap Screw Hex Head Bolts
  • Precise applications where tight tolerances on the body dimensions are required. 
  • Features flat washer facing under the bolt head.
  • Also called a finished hex bolt.
  • Appropriate for when mechanical properties are more important than dimensional tolerances. 
  • Hex bolts have a flat end and lack the washer face under the head.

17-4 PH Hex Head Cap Screw Advantages  

The most important feature of a 17-4 PH hex head cap screws is that it has a larger bearing surface area which provide better clamping pressure than other type of fastener such as a socket head cap screw. Additionally, since debris build up is less of an issue with this style of fastener verses a socket head cap screw, they are ideal of dirty applications where particles could clog up a socket. Though 17-4 PH socket heads are typically used for tight access applications, hex heads can be a better choice when there is only side clearance available for tightening. 

 

 


17-4PH Chemistry & Specifications

17-4PH Specifications: UNS S17400, AISI 630, ASTM A564-630, Werkstoff 1.4542, AMS 5604 Sheet, Strip and Plate, ASTM A 693 Plate

17 4 PH Chemistry

ASTM F593, Grade 630
This specification covers seven groups of stainless steel alloys, with ASTM F593, Grade 630 applying 17-4PH. ASTM F593 Grade 630 covers the requirements for 17-4PH stainless steel bolts, hex cap screws, and studs sized 0.25 to 1.50 inches, inclusive, in nominal diameter. It is intended for common use and for service applications requiring general corrosion resistance.

ASTM F593 Grade 660 chart B


Common 17-4 Fastener Conditions:  Aged Conditions vs Tensile Strength

ASTM A564 GR 630
This specification covers bars and shapes (such as fasteners) of age hardened stainless steels such as 17-4PH. It includes hot-finished or cold-finished fasteners that are produced by hot rolling, extruding, or forging. Grade 630 shall be furnished in the solution-annealed or or age-hardened condition.

Tensiled Data vs Aged Condition Updated 7 2021

Request a Quote / Order

Call: +86-755-29971616 or Submit a Request

Not sure what material is best for your application?

Contact an Expert

Use Our Material Selector

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert