Ultra-strength combined with extreme temperature capabilities

As aerospace engineering advances, so must the materials to meet the technological requirements of this industry. Nuts made from MP159 have been developed to provide a solution to high temperature, high strength components. MP159 lock nuts offer strength capabilities similar to other Cobalt Alloys (MP35N) but can be used at much higher temperatures - up to 1100°F, compared to MP35N’s usable limit of 800F. In addition, MP159 lock nuts can be used beyond 1100°F in short term situations. MP159 lock nuts are available in flexloc all metal and nylon insert styles.

Key Benefits

  • High ultimate tensile strength of 275 ksi and yield strength of 265 ksi (Cold Worked and Age Hardened) combined with excellent ductility and toughness
  • Similar corrosion resistance compared to MP35N which is usable in mineral acids, hydrogen sulfide, seawater and salt spray environments.
  • Excellent fatigue resistance and creep strength at elevated temperatures
  • Excellent resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement

Applications

  • The aerospace industry relies on MP159 nuts for its most advanced gas turbine and jet engines, rocket boosters and jet propulsion systems.
  • Power generation and chemical processing utilize MP159 lock nuts for applications that demand high strength at extreme temperatures.

Resources: MP159 Torque Spec

MP159 Fastener Types:  Bolts, Nuts, Screws, Studs, Threaded Rod, Washers


MP159 Locknut Features and Beneifts

A MP159 locknut resists loosening from vibrations and torque. One of the most common styles is a prevailing torque locknut. This kind of MP159 locknut has a prevailing torque feature which deforms elastically, preventing it from freely spinning like a standard nut.

The two most common and reliable forms of prevailing torque locknuts are the flexloc style and the polymer insert lock nut. A MP159 flexloc nut is all-metal in composition with a segmented collar that creates six “locking fingers,” that act as a spring. MP159 polymer insert lock nuts are often referred to as nylon insert locknuts, although various high performance polymers can be used for the screw threads to “bite into.” Both flexlock and polymer insert locknuts are available in both hexagonal and 12 point configurations.

All Metal Flexloc Lock NutFlexloc Lock Nut Insert Lock NutPolymer/Nylon Insert Lock Nut
  • Can be used at high temperatures
  • Distributes load evenly due to the fact that it is manufactured as one solid piece.
  • Is THE most reliable all-metal self-locking nut.
  • As it is all metal, it is best for high temperature or corrosive applications
  • One of the only all-metal lock nuts that is certified to 15 cycles of prevailing torque – which is military standard.
  • Overall the most reliable locknut, with the only limitation of application temperature
  • Best for low temp applications, typically less than 350°F
  • Various polymers inserts available (Nylon, Vespel, PVDF, etc.) for higher temp. or corrosive applications.
  • Excellent reusability – can reliably be re-used 15 times
  • Eliminates galling and cold-welding common with exotic alloys

Other all metal lock nuts available include the MP159 stover and elliptical styles. Though these styles are often a cheaper initial cost, they are less reliable than the flexloc style. As these styles delivering less prevailing torque cycles and often result in more failures, the flexloc style is a better investment for both reliability and cost savings.


MP159 Chemistry and Specifications

MP159N Specifications: UNS R30159

MP159 chemistry chart

 


MP159 High Strength Data

strength data chart V2

 

 Tensile Curve MP159 Cold Worked

 

Tensile Curve MP159 Elevated Temperature

 

 

Not sure what material is best for your application?

Contact an Expert

Use Our Material Selector

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert