A286 / Alloy 660 for excellent high temperature oxidation resistance

A286 bolts, also known as Alloy 660 bolts are stainless steel alloy which contains iron, nickel and chromium. A286 hex bolts are known for their high strength, creep resistance and oxidation resistance at elevated temperatures once age hardened.  As a result, A286 hex bolts provide high levels of strength from room temperature up to about 1300°F (700°C).

A286 hex head bolts are also mildly corrosion resistant. While they should not be used for strong acid environments, they provide excellent oxidation resistance up to 1500°F (815°C) in conditions that would typically be found in high temperature exhaust streams.

 A286 Stainless Steel High Temperature Usage

Applications

Because of the properties of Alloy 660 / A286, these hex bolts are often found in high temperature engine, manifold, exhaust and turbine applications as well as off-shore oil & gas applications. In addition, A286 / Alloy 660 is also non-magnetic and finds a niche in non-magnetic cryogenic equipment. Special Fasteners China. & Fastener also offers A286 fasteners to meet ASTM A453 Grade 660 specification. This ensures specific tensile strengths and rupture properties, which are critical for many high temperature specifications.

Resources: A286 Torque Specs

Bolt Types Available: Hex Bolts, Shoulder Bolts


A286 / Alloy 660 Hex Head Bolt Features and Benefits

It is important to differentiate between a -286 hex head bolt and hex head cap screw. Often people assume they are the same, but they are actually very different fasteners in terms of how they are manufactured, as well as from an application perspective. Regardless of your choice, A286 / Alloy 660 hex heads offer strong, stable joints because of their large head service. 

The Hex Comparison

Hex Head Bolts

Hex Head Cap Screw
  • Hex bolts have a flat end and lack the washer face under the head.
  • Appropriate for when mechanical properties are more important than dimensional tolerances.
  • Features flat washer facing under the bolt head.
  • Also called a finished hex bolt. 
  • Has tighter tolerances on the body dimensions. 
  • Best used for precise applications where tight tolerances on the body dimensions are required. 

 


ASTM A453 Grade 660

Material specification ASTM A453 Grade 660 applies to bolts, studs, studs and other fasteners. It ensures fasteners meet strength standards for use in high temperature bolting applications. ASTM A453 Grade 660 is classified into 4 property classes / heat treatments: A, B, C & D, each designated with different tensile and stress rupture properties. The most common of the ASTM 453 classes are class A or D. The grades A, B and C all have the same minimum tensile strength and minimum yield strength of 130ksi and 85ksi respectively. However grade D has a significantly better yield with a min tensile of 130ksi and a min yield of 105ksi.

Additional A286 / Alloy 660 Specifications, Cold Working & Heat Treatments

AMS A286 / Alloy 660 Heat Treatments

By AMS numbers, the most common for A286 / Alloy 660 is AMS 5737 (same as Grade A) and then AMS 5732 (same as Grade B).

A286 / Alloy 660 Cold Worked Fasteners

For additional strength, A286 could be aged and cold worked to achieve a min ultimate tensile strength of 160ksi upon request.

Additional Specifications

UNS S66286, ASTM A453, AMS 5525, AMS 5726, AMS 5732, AMS 5737, AMS 5804, EN 1.4980, GE B50T1181, GE B50T12, GE B50T81, Werkstoff 1.4980, ASTM F2281

A286 / Alloy 660 Chemistry

A 286 Chemistry

 


Mechanical Properties

A286 Stainless Steel Tensile Properties

A-286 Tensile Curves

 

Request a Quote / Order

Call: +86-755-29971616 or Submit a Request

Not sure what material is best for your application?

Contact an Expert

Use Our Material Selector

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert