A286 / Alloy 660 for excellent high temperature oxidation resistance

A286 screws, also known as Alloy 660 screws are stainless steel alloy which contains iron, nickel and chromium. A286 torx screws are known for their high strength, creep resistance and oxidation resistance at elevated temperatures once age hardened.  As a result, A286 screws provide high levels of strength from room temperature up to about 1300°F (700°C).

A286 torx screws are also mildly corrosion resistant. While they should not be used for strong acid environments, they provide excellent oxidation resistance up to 1500°F (815°C) in conditions that would typically be found in high temperature exhaust streams. For the most critical applications, we offer bolts screws per ASTM A453 Grade 660. This ensures tensile and rupture properties.

 A286 Stainless Steel High Temperature Usage

Applications

Because of the properties of Alloy 660 / A286  these torx screws are often found in high temperature engine, manifold, exhaust and turbine applications as well as off-shore oil & gas applications. In addition, A286 / Alloy 660 is also non-magnetic and finds a niche in non-magnetic cryogenic equipment.

Resources: A286 Torque Specs

Screw Types12 Point ScrewsButton Head Cap ScrewsFlat Head ScrewsHex Cap ScrewsPan Head ScrewsSet ScrewsSocket Head Cap ScrewsTamper Resistant Security Screws, Torx ScrewsVented Screws


A286 / Alloy 660 Torx Screw Features and Benefits

A286 Torx screws are characterized by a 6-point star-shaped pattern, also called a star drive, spined socket or hexalobular (ISO 10664). Where Phillips heads were designed to cause the driver to cam-out (prevent overtightening), Torx screws were designed resist cam-out. This feature allows A286 / Alloy 660 torx screws to provide increased torque as well as better torque transfer between driver and fasteners. This feature also helps to reduce wear on driver bits.

Alloy 660 / A286 Torx Screw Advantages

  • Resistant to cam out (process by which a screwdriver slips out of the head)
  • A286 Torx screws are more difficult to strip
  • Increased tamper resistance as a star driver isn’t as common
  • Driver insert is less susceptible to damage when over torqued than Allen head

 


ASTM A453 Grade 660

Material specification ASTM A453 Grade 660 applies to bolts, studs, studs and other fasteners. It ensures fasteners meet strength standards for use in high temperature bolting applications. ASTM A453 Grade 660 is classified into 4 property classes / heat treatments: A, B, C & D, each designated with different tensile and stress rupture properties. The most common of the ASTM 453 classes are class A or D. The grades A, B and C all have the same minimum tensile strength and minimum yield strength of 130ksi and 85ksi respectively. However grade D has a significantly better yield with a min tensile of 130ksi and a min yield of 105ksi.

Additional A286 / Alloy 660 Specifications, Cold Working & Heat Treatments

AMS A286 / Alloy 660 Heat Treatments

By AMS numbers, the most common for A286 / Alloy 660 is AMS 5737 (same as Grade A) and then AMS 5732 (same as Grade B).

A286 / Alloy 660 Cold Worked Fasteners

For additional strength, A286 could be aged and cold worked to achieve a min ultimate tensile strength of 160ksi upon request.

Additional Specifications

UNS S66286, ASTM A453, AMS 5525, AMS 5726, AMS 5732, AMS 5737, AMS 5804, EN 1.4980, GE B50T1181, GE B50T12, GE B50T81, Werkstoff 1.4980, ASTM F2281

A286 / Alloy 660 Chemistry

A 286 Chemistry


Mechanical Properties

A286 Stainless Steel Tensile Properties

A-286 Tensile Curves

 

Request a Quote / Order

Call: +86-755-29971616 or Submit a Request

Not sure what material is best for your application?

Contact an Expert

Use Our Material Selector

Questions?

Our material experts are ready to help guide you through your specific application.

Contact an Expert
<