Torque Calculation

Bolt Weight Calculator

Vacuum Gaskets - For Ultra Low Pressure Sealing

Gaskets for vacuum chambers requiring extremely low leak rates

Gaskets for vacuum chambers that minimize leakage are critical in order to maintain the quality of the finished product.  No matter if its CVD, PVD, DVD, heat treating etc., maintaining a low vacuum and minimizing oxygen contamination is essential. If having the lowest leak rate is important to your process, our Revolution and JG / JP semi-metallic vacuum gaskets are the best available to industry.

Extremely Low Leak Rate

Our semi-metallic vacuum gaskets feature a metallic core which creates metal-to-metal seal as well as as soft sealing PTFE or graphite section. As a result, an extremely tight seal is created, having a leak rate that is 15,000x lower than typical gaskets used in vacuum systems.

No Outgassing

Beyond sealing, our vacuum gaskets will NOT outgas. A key feature to our vacuum gaskets is the metal-to-metal seal that protects and isolates the soft sealing graphite or PTFE from the process and air. Because of this design, no extra time is wasted during pump-down and the desired vacuum is achieved faster.

High Temperature Stability

The JG / JP vacuum gaskets can operate at elevated temperatures up to 1000°C. The Revolution vacuum gaskets up to 500°C

Revolution Gasket	JG/JP Gasket
Parameters Temperature: Cryogenic to 932°F / 500°C Pressure: Vacuum to 928psi / 64bar Pressure class: 400 / PN64 Carrier metal:  Stainless steel Thickness: 0.063" / 1.6mm Max dimension: 21in / 540mm	Parameters Temp: Cryogenic to 1830°F / 1000°C Pressure: Vacuum to 5800psi / 400bar Pressure class: 1500 / PN400 Carrier metal:  Stainless & Specialty alloys Thickness: 0.098" to 0.394" (2.5 - 10mm) Max dimension: 144in / 4000mm
Applications Ideal for heat transfer fluids and oils Designed to handle cycling & vibration Replaces: PTFE / Graphite / Fiber Gaskets	Applications Extreme pressure & temperatures Corrosive media, H2, hazardous service Replaces: Spiral Wound / Kammprofile
Advantages Leak rate 370x lower than graphite gaskets Spring like design for consistent sealing Very low sealing force required Minimal graphite residue on change out Metal sealing protects PTFE / Graphite	Advantages Leak rate 15000x less than spiral wound Extreme pressure / vacuum sealing Highest temperature stability Corrosion & temp resistant alloys Customizable for dissimilar flanges & gaps Very low sealing force required Minimal graphite residue on change out Metal sealing protects PTFE / Graphite

High Pressure Gaskets

High pressure gaskets with the lowest leak rate available to industry

Our high pressure gaskets are designed to minimize blowouts and detrimental gasket deformation often found in high pressure applications. Due to Revoseal's unique designs, both the Eco+ and JG / JP gaskets are ideally suited for challenging high pressures, steam hammering, pressure surges and cyclic environments.

If you are having gasket sealing or life issues due to high pressures with spiral wounds, kammprofile, graphite, fiber or PTFE gaskets, the Eco+ or JG / JP gaskets may be ideal. 

Eco+

Features a spring like seal which makes an ideal gasket for blowout protection, cyclic pressure applications, and steam hammering.

JG / JP

This is the highest pressure rate gasket offered, and is reserved the the hardest to seal and toughest pressure related applications.

Eco+ Gasket	JG/JP Gasket
Parameters Temperature: Cryogenic to 932°F / 500°C Pressure: Vacuum to 2320psi / 160bar Pressure class: 900 / PN150 Carrier metal:  Stainless steel Thickness: 0.063" / 1.6mm Max dimension: 48in / 1220mm	Parameters Temp: Cryogenic to 1830°F / 1000°C Pressure: Vacuum to 5800psi / 400bar Pressure class: 1500 / PN400 Carrier metal:  Stainless & Specialty alloys Thickness: 0.098" to 0.394" (2.5 - 10mm) Max dimension: 144in / 4000mm
Applications Excellent for harsh steam applications Minimizes impact of thermal hammering Replaces: PTFE / Graphite / Fiber Gaskets	Applications Extreme pressure & temperatures Corrosive media, H2, hazardous service Replaces: Spiral Wound / Kammprofile
Advantages Leak rate 730x lower than graphite gaskets High pressure / surge protection Minimizes blowouts Very low sealing force required Minimal graphite residue on change out Metal sealing protects PTFE / Graphite	Advantages Leak rate 15000x less than spiral wound Extreme pressure / vacuum sealing Highest temperature stability Corrosion & temp resistant alloys Customizable for dissimilar flanges & gaps Very low sealing force required Minimal graphite residue on change out Metal sealing protects PTFE / Graphite